• FTDI USB / UART TTL Serial Bridge

FTDI USB / TTL UART Serial Bridge

The FTDI chip on this board creates a USB to UART bridge, enabling PC applications to communicate with hardware having a UART interface. One end connects to the USB port on a PC while the other end provides the serial port for connection to the UART on a target device. The serial port, which operates at TTL-levels rather than RS232, is accessed from a 6-pin header with the following pin-out..
1 – GND
2 – CTS
3 – VCC (out)
4 – TXD
5 – RXD
6 – DTR

Pin 3 is a voltage output that can be used to power another board. The voltage can be selected from either 3V3 or 5V via a mini-jumper. This selector also defines the voltage at which the serial port operates.


USB connector : mini-USB

Length : 37mm

Width : 16mm

Height : 12mm

Serial output : TTL UART

Output voltage : 5V0, 3V3 selection option

What is included ? ...

1x FTDI USB to UART Bridge board

1x USB A to mini-B Lead 0.2m

This item is included with the P0716A Comms-Link and is not available to purchase seperately.

Weight: 20g

Write a review

Note: HTML is not translated!
    Bad           Good

FTDI USB / UART TTL Serial Bridge

  • Brand: Coastform
  • Product Code: FTDI-BASIC
  • Availability: Pre-Order
  • £2.00

  • Ex Tax: £0.00

Related Products

Really Useful Touch Switch - Programmable

Really Useful Touch Switch - Programmable

Capacitive (PCAP) Touch Sensor / Switch Senses touch through almost any non-conductive material suc..

£18.79 Ex Tax: £13.99